Axial 1/24 SCX24 1967 Chevrolet C10 4 Wheel Drive Truck Brushed Ready To Run

Description

Featuring a classic 1967 Chevrolet C10 truck body, this addition to the Axial SCX24 micro scale vehicle series comes fully assembled and equipped with LiPo battery, USB charger and AA transmitter cells. It’s ready-to-run and sized to run anywhere.
Horizon Hobby
Axial 1/24 SCX24 1967 Chevrolet C10 4WD Truck Brushed RTR, Silver, AXI00001T2
Featuring a classic 1967 Chevrolet C10 truck body, this addition to the Axial SCX24 micro scale vehicle series comes fully assembled and equipped with LiPo battery, USB charger and AA transmitter cells. It’s ready-to-run and sized to run anywhere.
Key Features
Realistic 1967 Chevrolet C10 Truck body
True, full-time 4-wheel drive
3-Link front and 4-link rear suspension for optimal handling
Full ball bearing drivetrain
Realistic steel frame rails for added strength
Introduction
INTRO_TEXT
Features
Axial® AS-1 servo with servo saver
Dynamite® 7.4V 350mAh 30C LiPo battery
Dynamite® 180-size, 88T Brushed Electric Motor
Realistic 1967 Chevrolet C10 Truck body
Two bright LEDs in front bumper for night driving
True, full-time 4-wheel drive
3-Link front and 4-link rear suspension for optimal handling
Worm drive gears for front and rear axles that add ground clearance
Realistic steel frame rails for added strength
Hinged body system for easy access to on-board components
Full ball bearing drivetrain
Licensed wheels modeled after 1:1 Method Wheels
Licensed tires modeled after 1:1 BF Goodrich Tires
Overview
The detailed, ready-to-run 1967 Chevrolet C10 Truck is the latest model in the popular SCX24™ series from Axial® Racing. Its compact, versatile 1/24 scale size opens up almost any environment to spur-of-the-moment RC crawling expeditions. When it’s time for a break at work, set up an obstacle course with items on your desk for the SCX24™ Chevrolet C10 Truck to negotiate. Any room at home can also become the setting for exciting feats and contests. If you’d rather run outdoors, go for it! Collect some twigs and marble-size rocks, dig a few holes, and soon you’ll have a challenging trail for fresh air adventuring. Your truck’s water-resistant electronics save you from having to worry about wet track conditions when you crawl. With its realistic steel chassis frame rails, steel front and rear axles, and steel dogbones, this model has the strength to deliver Axial®-caliber crawling performance even in 1/24 scale. It’s designed to keep right on running through rough trails and tough climbs. The SCX24™ 1967 Chevrolet C10 comes ready-to-run with all of the electronics, transmitter, receiver, servos, motor, ESC, batteries and charger included.
® Completion Level" src="https://www.horizonhobby.com/on/demandware.static/-/Sites-horizon-master/default/Scene7Images/AXI00001_PP_Feature_1.jpg" class="img-fluid"> SMALL SCALE, BIG PERFORMANCE
You expect solid performance from Axial® and the SCX24™ 1967 Chevrolet C10 delivers, with engineering and equipment that pulls the greatest potential from its compact size. The included Dynamite™ 88T brushed electric motor supplies the torque you need to get up and over most obstacles. And despite the dimensions, it’s a pretty capable rock crawler, too! We've also included extra suspension links for adjusting your wheelbase length.
HINGED BODY SYSTEM
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing two body clips and swinging the body up.
EVERYTHING IS INCLUDED!
The SCX24™ includes everything you need to get going. The product is fully assembled, and we've included batteries for the transmitter, and a LiPo battery pack and USB charger.
AX-4 2.4Ghz TRANSMITTER
The AX-4 transmitter features a throttle trim knob for low, medium, and high speed setting, a switch for steering servo reversing, steering dual rate, a switch for third channel applications (aux port on the ESC/Receiver), steering trim, battery level indicator, a bind button, and on/off switch. The AE-6 ESC/Receiver features a jumper for setting one of two brake options (brakes, or instant reverse), two LED light ports, an auxiliary port (channel 3), a channel 2 port, and a steering servo port.
FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
DYNAMITE 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It’s mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you’ve known and expect from Axial. #AXIALPERFORMANCE
LED LIGHTS INCLUDED
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
METHOD MR307 HOLE WHEELS & BFGOODRICH® KRAWLER™ T/A® KX TIRES
The MR307 Hole is a fresh take on the classic hole-wheel design that dominated early off road racing. Just like the Double Standard and NV, the Hole features a simulated beadlock ring by way of a strategically placed under-cut on the outer lip of the wheel. BFGoodrich Krawler™ T/A® KX tires are the winner of more rock-crawling championships than all other tires combined (Race spec tire, Years 2004 through 2008). The Axial version captures the same aggressive look you’ve been waiting for in a smaller 1/24 scale version.
FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn’t mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
©2020 Horizon Hobby, LLC. Axial, the Axial logo, SCX10, SCX24, Dynamite, and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. General Motors Trademarks are used under license to Horizon Hobby, LLC. BFGoodrich and the BFGoodrich logo are trademarks of Michelin Lifestyle Limited, used under license. Method Race Wheels and associated logos are property of Method Race Wheels, used under license. All other trademarks, service marks and logos are property of their respective owners. NOTE: Prototype shown. Some imagery may differ from the actual product.
Item Condition
All items sold by Horizon Hobby are sold as "New: A brand-new, unused, unopened, undamaged item." We do not sell used, opened, or damaged items.
If an item is damaged during shipping, please see our Returns section to arrange a return.
Shipping
Returns
About Horizon
Contact Us
Shipping
Horizon Hobby ships to all 50 States as well as Puerto Rico, Virgin Islands, and other US protectorates.
Unfortunately, we cannot ship to APO/FPO or PO Box addresses at this time.
Some restrictions apply based on destination and item size.
Our
FREE
shipping and combined shipping discounts save you money. We offer
FREE
ground shipping on US orders of or more! Only .99 or .99 for ground service on US orders under . We also offer expedited shipping.
We cannot combine shipping on multiple orders.
You will also receive
free shipping
on all orders over

with a discount applied in the eBay shopping cart (applies to contiguous US orders only).
We ship out of our two warehouses in the United States located in Illinois and California. We will ship your order from the closest warehouse with inventory. Shipping times may vary based on shipping location.
ORM-D and Lithium / Li-Po Battery Restrictions
ORM-D items can only be shipped via ground delivery. Products of this nature include quarts of fuel, glues, paints, thinners, aerosol sprays, and certain lithium batteries. We cannot ship ORM-D items to Alaska, Hawaii, Puerto Rico, or other US Protectorates. Other restrictions may apply based on APO/FPO shipping rules.
Payment
We accept all major credit cards, PayPal, and Google Pay.
Taxes may be applicable at checkout.
Returns
Returned merchandise must be in unused condition and in its original packaging. The mounting of engines and accessories, running fuel through engines, cutting or pushing out the balsa sheets in kits, and other similar actions constitutes used merchandise. Radios must be returned with unmounted servos and switch harness.
We do not accept returns on Lithium-based batteries sold separate from a kit (i.e.: standalone) or Nickel or Alkaline batteries which have been opened, used and / or charged, due to an abundance of caution and care for our customers. Shipping conditions and parameters for batteries are particularly sensitive.
Flammable or combustible materials or products (regardless of whether the item is open or unopened) such as: Nitro engines (if fuel has entered the engine), Nitro fuel, Unopened as well as opened, charged and / or used Lithium Ion / Polymer (LiPo) batteries and other Lithium-based batteries. Any type of opened, charged and / or used battery including LiPo, Nickel-Metal Hydride (NiMH), Nickel-Cadmium (NiCd), other Nickel-based batteries and / or Alkaline-based batteries. Sealed Lead Acid batteries. Paints, thinners, certain glues or cements/pastes. Aerosols or compressed gas canisters. Rockets, kits containing rockets with or without igniters, igniters, hobby fuel (both quart or gallon).
When packing your order for return, please be sure all the original packing material and instruction papers and/or manuals are included. We will be unable to process your return if parts are missing, or if items are not packed properly to avoid damage to products and their boxes and/or packages. ARF kits are specially packaged to insure safe shipping of all contents. In order to receive credit for a returned ARF, the contents must be returned in the original plastic covers and arranged in a manner that will not damage the contents or packaging.
Please contact us for a return authorization number by opening a return case on Ebay. Freight charges will not be refunded. The customer is responsible for insured shipping back to our shop.
Returns sent COD will not be accepted.
Horizon Hobby reserves the right to charge a 15% restocking fee on any merchandise returned for credit.
About Horizon Hobby
Providing an exceptional customer experience is a mission we take seriously. That's why, when it comes to radio control (RC) fun, we don't toy around. Our advances in model aircraft and vehicle stabilization, 2.4GHz control and ready-to-run convenience have made RC hobbies more exciting and more accessible than ever before.
More importantly, we love RC just as much as our customers do. That's why we don't buy off-the-shelf product and slap our name on it. Any product that bears the Horizon Hobby name was developed by a team of in-house experts, many of whom have decades of experience in the hobby.
But our commitment to a great experience doesn't stop at the drawing board. Every Horizon Hobby product is backed by the best customer service you will find in any industry. Customer phone support, warranty repairs, online resources – we do it all and with the same passion for excellence we started with back in 1985.
Horizon employs nearly 700 people and sells products in more than 100 countries around the world. Corporate headquarters, along with the main distribution facility and product service center, are located in Champaign, Illinois. Additional distribution centers are located in Ontario, California and Barsbüttel, Germany (site of Horizon Hobby GmbH). California is also home to the Losi RC car division (Ontario) and the Athearn train line in Long Beach.
At Horizon Hobby, we help people have fun with hobbies. Providing an exceptional customer experience is a mission we take seriously. That's why, when it comes to radio control fun, we don't mess around.
Please contact us through your original purchase on eBay. We're always striving to answer e-mails as quickly as possible.